Lumatek Professional Lighting

Lumatek has come up with the VF (vertical farming) LED fixture for Seedlings, Clones and of course Vertical Gardens.

These versatile high efficacy fixtures will ensure you reach your goals. From propagation factories and nurseries, climate chambers, warehouse farms, containers and everything in between, the Lumatek VF range will deliver the light quality spectral and photon flux levels required.

The VF range includes the new 'Clear Glue protection Cover Technology', resulting in higher light transmission (of 99%) without light loss, extended lifetime of diodes, extra corrosion resistance and high waterproof of IP-65. For basic maintenance, simply clean the bars with damp cloth.

VF90W

Lumatek
5060560031802
Add to cart
Lumatek VF90W LED Fixture

The VF90W comprises of three 30W LED bars with 4000K White and 3000K Warm White diodes.

It has a PPF output of 244 μmol/s and a 2.4 μmol/J Efficacy.

This fixture requires a 650 Watt Driver (sold separately) which can run up to 7 VF90W fixtures.

It can be dimmed with a 0-10V Light Dimmer (sold separately) or externally controlled with a Digital Control Panel.

Daisy-chain driver connectivity is possible if you would like to add more units to the system so all fixtures can be dimmed with a single dimmer.


Instruction Manual


VF120W

Lumatek
5060560031819
Add to cart
Lumatek VF120W LED Fixture

The VF120W comprises of four 30W LED bars with 4000K White and 3000K Warm White diodes.

It has a total PPF output of 308 μmol/s and a 2.4 μmol/J Efficacy.

The fixture requires a 650 Watt Driver (sold separately) which can run up to 5 VF120W fixtures.

This fixture can be dimmed with a 0-10V Light Dimmer (sold separately) or externally controlled with a Digital Control Panel.

Daisy-chain driver connectivity is possible if you would like to add more units to the system so all fixtures can be dimmed with a single dimmer.


Instruction Manual


VF650 watt Driver

5060560031826
Add to cart
Lumatek VF LED Driver

Daisy Chain Control Cable

Lumatek
5060560031031
Add to cart
Lumatek Daisychain Control Cable

The 5 metre long Control Link Cable is designed to daisy-chain Lumatek Controllable LED Fixtures. Up to 100 units can be connected per controller (50 per zone). The cable creates a stable and precise connection without any interference



After connecting the first LED directly to the Control Panel, connect the Daisy Chain Control Cable to the 'Signal Out' output, and connect the other end to the 'Signal In' input of the next fixture.


 Suits
 All Lumatek LEDs