TIME-R Digital Timer

Add to Cart
Time-R Digital Timer
TIME-R Digital Timer - an all new concept for the hydroponics industry.

The Timer-R digital timer has a large easy to read screen, a grow room friendly green back lit screen and an easy to use cross button for programming. This is just scratching the surface as the Time-R has many features never before seen on a timer…. until now.

The Time-R operates like a normal timer but has a multitude of other options for controlled switching that go down to one second intervals if needed. If you want to run a fan/pump with different settings at night, or you want to dispense CO2 using precise dosing at particular times throughout the day, the Time-R has you covered.


Set precise on and off times, up to 15 times a day


Turn equipment on and off, repeating at regular set intervals - from 1 second to 99 hours


Using this mode allows you to run your equipment on and off repeatedly at set intervals throughout a 24-hour period. Maximum 3 group settings.

24 Hour Timer

Add to Cart
24hr Mechanical Timer
  • Simple operation
  • 15 minute switching periods
  • up to 48 on and 48 off periods 
  • manual override function
  • Max. Current: 10 Amp

Multi Purpose Timer

Add to Cart
Multi Purpose Timer
This handy timer allows you to set the time period the unit is on, and the time period the unit is off, and then it cycles back and forth between the two. Each period can be set from from 15 seconds to 99 hours

Feed Pump Controller / Timer

Add to Cart
Pump Feed Timer
Up to 96 on and off times can be programmed in each 24 hour period, with each cycle as short as ten seconds.
  • Set the main timer for 'on' times
  • Adjust feed timer for length of 'on' time
  • Max. load: 500 Watt

Timer Reset Box

Add to Cart
Timer Reset Box

The Timer Reset Box is used to control when power should be restored after a power outage.

Normally a mechanical timer or light control box (without battery backup) stops when power is lost and restarts from the same (time) position once power is restored.

To prevent a grow cycle time getting distorted against real time, the timer or light control box needs to be prevented from automatically starting.

The Timer Reset Box does this by preventing power from the box from restoring until the reset button is pressed. This gives the grower the opportunity to make adjustments if necessary before the cycle is restarted.

  • Max. current: 7.5 Amp