HM Digital Spare Parts

PH-200 Replacement Probe

Add to cart
PH-200 Replacement Probe

If the PH-200 sensor is damaged, a new sensor can be fitted

Fitting Instructions;

  1. Remove the sensor gasket ring by twisting counter-clockwise.
  2. Gently pull the sensor off the unit.
  3. Gently insert the new sensor into the unit. Be sure to align the grooves properly. Never force the sensor unto the unit!
  4. Make sure the rubber gasket O-ring is properly positioned on the sensor.
  5. Screw the orange gasket ring back onto the unit by twisting clockwise. Hand tighten.