Holland Forge Wholesale Hydroponics

Propagation Equipment

Now Available;

Clear lid to suit propagation tray.

Flexible Heat Mat

By Hydrofarm

This flexible heat mat from Hydrofarm fits the 530 x 270mm propagation tray. It is a 17watt matt, which is designed to raise rooting area temperatures by approximately 5 to11 degrees celsius above ambient. Can be used with a temperature controller (thermostat) to keep temperatures steady.

Heat Mat Thermostat

This thermostat, (in conjunction with a heat pad) will help regulate the temperature of a humidicrib. The probe is inserted through the clear lid and senses the temperature of the growing area. If the temperature becomes too low, the thermostat turns the heat mat on and brings the temperature up to the set rate, at which point it turns off again. Temperature range 0 - 40 degrees Celsius. Maximum 7.5amp.

Humidity Cribs

Heat 'n' Grow clear dome lid - fits the propagation lattice tray/solid tray, which in turn fits on to the Heat 'n' Grow heat pads. It has adequate height to develop clones to a good healthy start, and three adjustable vents for air circulation.

Heat Pads

Low Wattage and extremely Energy Efficient, Heat 'n' Grow Propagation Trays are the ideal way to ensure you are in control of your growing conditions. They allow the germination and striking of plants and flowers, all year round. Sturdy and water resistant, the quality of this product is top class.

Model	Dimensions	Wattage	Thermostat	Tray Capacity
TPS 020	300 x 400mm	9	No	One
TPS 030	390 x 400mm	20	Yes	One
TPS 040	670 x 400mm	40	Yes	Two
TPS 080	1300 x 400mm	80	Yes	Four

2x18 Watts in a Box

by Ablite

This is a fully enclosed cloning unit, complete with twin fluoros and fluoro batten.

removable sides (one side removed in image)
fits 2 standard propagation humidicribs
comes complete with fluoros and fluoro fitting
enclosed design to increase light efficiency
everything supplied in one carton with simple instructions
assembled unit measures 714 x 410 x 360mm

Clonex Gel

Available in "Purple" for softwood cuttings, and "Red" for hardwood.

50ml Gel
250ml Gel
1 Litre Gel

Root X

Available in the following;

Liquid 50ml (NRA APPROVAL 33348/0802)

Gel 50ml (NRA APPROVAL 50668/0300)

Powder 18gram (NRA APPROVAL 33347/0802)

Cloning Knife

This knife is ideal for making cuttings. It has break off blades to ensure it is always sharp. It is also priced cheap enough to be disposed off after a single use, to help prevent any cross contamination.

Clone 2XS

From the home of Bio Mix. A bioponic foliar feed to super boost clones at that vital stage.

Envy 500ml

Envy is a unique water based polymer that reduces transpiration of plants, and helps protect plants from heat and cold. It does this by putting a fine polymer coverage over the plants, protecting it from external factors, and helping them to retain moisture.

Dosage Rate: 50 - 100ml per Litre

Oxy Plus

Oxy Plus is a sanitizer and oxygenator. It can be used to improve seed germination, the strike rate of cuttings, and to disinfect your system of bacteria and fungi.

Active Ingredient : Hydrogen Peroxide (50%).

Plant Labels

Ideal for labelling cuttings and seeds after planting. Made from plastic, can be reused. 50 per pack.

Watersorb

Watersorb acts as a sponge and can absorb large quantities of water. The water forms discrete gel particles around which roots can grow then extract water as required, repeating this process over many growing seasons.

Great 'Jelly' for jelly wrestling !!! Just add water, food dye, and bikini clad girls. Not recommended for people with a heart condition.