Pots
!

LP-50 NFT Pot
!
LP50
  • 50mm Deep
  • 44mm Diameter (at top)
  • square lip

5 3/4 Inch Mesh Pot
!
5 3/4 Mesh Pot
  • 100mm deep
  • 140mm diameter (at top)

140mm Pot
!
140mm Pot
Light Weight
1.6 Litre

150mm Standard Pot
!
150mm Pot
1.8 Litre

200mm Squat Pot
!
200mm Squat Pot
3.3 Litre

200mm Standard Pot
!
00mm Standard Pot
5 Litre

250mm Standard Pot
!
250mm Pot
9 Litre

290mm Square Pot
!
290mm Square Pot
18 Litre

290mm Sqaure Bucket
!
290mm Square Bucket
(No Holes)

24 Litre

 

Two Pot Grow System

The 18 Litre square pot with holes (above) slides into the bottom bucket (right). As the bottom bucket is deeper the the top pot, this creates a small reservoir. Fill the top pot with the growing medium, and drip feed. The nutrient can then drain through to the bottom bucket where it can be discarded or recycled. Suitable for Tub Outlets to connect as many units together as you need.

330mm Pot
!
330mm Pot
15 Litre

300mm Bucket
!
300mm Bucket
(No Holes)

16 Litre

 

Two Pot Grow System

 As with the Two Pot Grow System above, you can create a similar system using these round pots. The 330mm pot slots neatly on top of the 300mm bucket.

Pot Grid Insert
!
Pot Grid Insert

 

 

These drop into a black garden pot (500mm) and create "two pots in one". Save shop space and cut down on system height.

Pot Stands
!
Pot Stands

Snap together stands for large black pots. Very sturdy stands that hold the weight of the pot when filled with media and/or water. They feature side cut-outs to run return hose from the side or the bottom of the pot. Comes flat packed so they don't take up valuable shop space, and easily snap together to assemble.

Available for the following pot sizes;
300mm (12")
425mm (17")
500mm (20")
500mm (20") Tall *

* Taller pot stand allows for extra height or space under the pot.